ITC-5 depth issue

[kdg_dean_austin]

Hi,

Thanks for the reply!

A1 - Very good, that is what I suspected and the technician made the right call

A2 - And yes, the i70/iTC-5 replaced the old ST60 TriData, and yes, I did run the setup. However, I have to now sheepishly admit that I have solved the problem. Turns out ALL four pieces of new Raymarine technology needed updating - the software running on the i70, iTC-5, ST NG to ST converter, and the A65 MFD were way out of date. I downloaded the latest updates from your Website and used the A65 MFD to update all the pieces. Everything is working great and I'm very happy!

Q3 - Now that everything is working properly, I'm adding the Rotary Rudder Reference Transducer to my boat. I can connect that to the ST4000+ Autopilot or the iTC-5. Which should I choose? Also, the Fluxgate compass is directly connected to the ST4000 right now. Should I move that to the iTC-5 also? In other words, does the ST4000 Autopilot need direct connections to the Fluxgate compass and rudder reference transducer to function, or can that device gets the needed data via the SeaTalk interface (provided by the SeaTalk NG to SeaTalk Converter)?

Thank you very much for your help!

Dean Thomas