Raymarine forum / Raymarine Forums / Instruments v / ITC-5 depth issue

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
ITC-5 depth issue
03-23-17, 08:06 AM
Post: #4
Chuck - Raymarine - Moderator Offline
Administrator
*******
 		Posts: 14,319
Joined: Oct 2014
Reputation: 43
RE: ITC-5 depth issue
Dean,

I'm glad to learn that the previously reported issues have been resolved.

Q3. Now that everything is working properly, I'm adding the Rotary Rudder Reference Transducer to my boat. I can connect that to the ST4000+ Autopilot or the iTC-5. Which should I choose? Also, the Fluxgate compass is directly connected to the ST4000 right now. Should I move that to the iTC-5 also? In other words, does the ST4000 Autopilot need direct connections to the Fluxgate compass and rudder reference transducer to function, or can that device gets the needed data via the SeaTalk interface (provided by the SeaTalk NG to SeaTalk Converter)?
A3. Please click here to view a FAQ addressing this subject.
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
ITC-5 depth issue - kdg_dean_austin - 03-19-17, 08:10 PM
RE: ITC-5 depth issue - kdg_dean_austin - 03-22-17, 04:11 PM
RE: ITC-5 depth issue - Chuck - Raymarine - Moderator - 03-23-17 08:06 AM
RE: ITC-5 depth issue - kdg_dean_austin - 03-23-17, 07:27 PM

Forum Jump:


User(s) browsing this thread: 6 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication