The following warnings occurred:
Warning [2] count(): Parameter must be an array or an object that implements Countable - Line: 802 - File: showthread.php PHP 7.4.33 (Linux)
File Line Function
/showthread.php 802 errorHandler->error




Raymarine forum / Raymarine Forums / Multifunction Displays v / MFD Drain wire

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
MFD Drain wire
03-27-17, 03:04 PM
Post: #1
Bob234 Offline
Junior Member
**
 		Posts: 8
Joined: Mar 2017
Reputation: 0
MFD Drain wire
I have searched the forum and FAQ's before initiating this question.
I am installing an a125 MFD which I believe has a drain wire. From the forum answers I was expecting to see a bare wire for the RF drain (as did my old Pathfinder plotter). The supplied cable(s) are all insulated. There is a small black insulated wire similar in size to the NMEA wires which seems to me to be the drain wire.
Is this correct or does my model not have a drain?

Many thanks.

Bob
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
MFD Drain wire - Bob234 - 03-27-17 03:04 PM
RE: MFD Drain wire - Bob234 - 03-27-17, 04:17 PM
RE: MFD Drain wire - Bob234 - 03-28-17, 09:49 AM

Forum Jump:


User(s) browsing this thread: 4 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication