Raymarine forum / Raymarine Forums / General Discussions v / wi-fish wiring?

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
wi-fish wiring?
03-30-17, 08:41 AM (This post was last modified: 04-05-17 10:55 AM by Chuck - Raymarine - Moderator.)
Post: #2
Chuck - Raymarine - Moderator Offline
Administrator
*******
 		Posts: 14,319
Joined: Oct 2014
Reputation: 43
RE: wi-fish wiring?
Welcome to the Raymarine Forum Steve,

Please note that the instructions to connecting the power and drain leads of the Wi-Fish Transducer /Power Cable is specified within Section 5.3 Cable connection –DV, DVS, Pro and Wi-Fish™of the Dragonfly-4, Dragonfly-5, Dragonfly-7 & Wi-Fish Installation and operation instructions. Within the displayed diagram,
- the red wire labeled 2 in the diagram is the cable's drain lead,
- the black wire labeled 3 in the diagram is the cable's -12V lead,
- the red wire labeled 5 in the diagram is the cable's +12V lead.

Please click here to view a FAQ addressing drain leads.
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
wi-fish wiring? - the Brain - 03-29-17, 04:12 PM
RE: wi-fish wiring? - Chuck - Raymarine - Moderator - 03-30-17 08:41 AM
RE: wi-fish wiring? - the Brain - 03-30-17, 08:12 PM
RE: wi-fish wiring? - the Brain - 04-01-17, 07:08 AM
RE: wi-fish wiring? - the Brain - 04-05-17, 06:57 AM

Forum Jump:


User(s) browsing this thread: 2 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication