I NEED HELP WITH AN INSTALLATIONâ€¦

Thread Rating:

0 Vote(s) - 0 Average
1
2
3
4
5

Threaded Mode | Linear Mode

I NEED HELP WITH AN INSTALLATIONâ€¦

03-23-16, 08:35 AM

Post: #5

Steve Schwartz Offline

Junior Member

Posts: 5
Joined: Mar 2016
Reputation: 0

RE: Seatalk Installation issues...

One more question... The MFD has comes with a multi cable with 12vdc wires to be connected to the breaker panel in the boat. Since the ST60 instruments are all on the same STng backbone bus with the MFD will those instruments get power from that connection via seatalk or do I need to connect another power wire from the ST to STng converter to the breaker panel? If I connect an NMEA2000 device to that bus will the 12v from the Raymarine gear be a problem? Can there be multiple sources of power in the same backbone line?

Thanks,

Steve

« Next Oldest | Next Newest »

Messages In This Thread

I NEED HELP WITH AN INSTALLATIONâ€¦ - Steve Schwartz - 03-21-16, 10:46 AM

RE: Seatalk Installation issues... - Chuck - Raymarine - Moderator - 03-21-16, 03:59 PM

RE: Seatalk Installation issues... - Steve Schwartz - 03-21-16, 11:57 PM

RE: Seatalk Installation issues... - Chuck - Raymarine - Moderator - 03-22-16, 08:06 AM

RE: Seatalk Installation issues... - Steve Schwartz - 03-23-16 08:35 AM

RE: Seatalk Installation issues... - Chuck - Raymarine - Moderator - 03-23-16, 09:53 AM

RE: Seatalk Installation issues... - Steve Schwartz - 03-23-16, 10:09 AM

RE: Seatalk Installation issues... - Chuck - Raymarine - Moderator - 03-23-16, 10:56 AM

User(s) browsing this thread: 3 Guest(s)