Updating my MFD with a few system upgrades.

[Shawn Seim]

Hello,

I am presently running a c125, CP370, HS5, and a RD 418HD. I am running the CP370 and the RD 418HD through the HS5, which then feeds the c125 via a Raynet to Raynet A62361 cable. My c125 is mounted in an aluminum center counsel with an aluminum hard top. GPS signals are received, but not what I consider to be a timely manner. I would like to add the following to my system,

1. AIS 650
2. AIS 100
3. RS 150
4. Possibly, in the future the Ray 52.

Could I ask for your help in producing a shopping list to install these items so that they may be used with my current system?

In addition to my " shopping list" I need to ask you the following questions.

A. Can I use the Seatalkng Spur cable that is supplied with the AIS650 directly into the c125?
B. Will the addition of the RS 150 necessitate setting up a Seatalkng backbone to allow interface with the c125?
C. If I should elect to live with slower GPS signal acquisition, and not use the RS 150. Can the AIS power supply come off of my house bus via the appropriate fuse, or must it be powered via Seatalkng?

I have to admit, I am just an average guy who loves to fish. I have successfully installed all of the aforementioned Raymarine equipment myself, and I am hoping to be able to do the same with my planned upgrades. I Have a pretty good grasp on working with my boat, and my installation skills have worked so far. I will gladly welcome any assistance that you can offer.

Thank you.
Shawn