[CA] [CA11] Perception Pescador Pro Kayak And Dragonfly transducer

[Chuck - Raymarine - Moderator]

Welcome to the Raymarine Forum Jeff,

One of our staff has installed a CPT-100 installed in his Perception Pescador Pro Kayak. According to the staff member, the CPT-100 fits cleanly inside the transducer well, and the cable comes through the scupper.

Our staff member had to get creative though to get it permanently mounted. The Pescador Pro has a set of stainless screws/inserts in its transducer well, probably sized for a Lowrance transducer. He actually used a zip tie with a mounting [censored] through the eye of the CPT-100. I then screwed it into one of those holes using the bolt provided with the kayak. He bedded the other end of the transducer (the narrow DownVision end) in a bed of hot-glue to adhere it to the hull. It stayed in nicely all last season, and all winter (outside). According to the staff member, the nice thing about the hot glue is that its easy enough to pull hard and release it, or just heat it a bit to remove.

I have asked the staff member to add some photos of his installation and to comment on the resulting performance.