CP470/570 connection with B175H & B175HW transducers

[Chuck - Raymarine - Moderator]

Welcome to the Raymarine Forum mburazor,

Unfortunately, the CP470 and CP570 are not designed to operate with both a B175H and B175HW (both high frequency transducers ... therefore having identical XIDs) connected to the sounder module. Unless seeking to replace the B175H with the B175HW, then it would be recommended that the B175HW be returned, as it has not yet been installed. The B175H would typically be paired with a B175L or B175M. The A80328 Cable may be used to permit transducers designed to be installed in pairs (ex. B175H, B175L, B175M) to instead be used alone with a CP470 or CP570.