Raymarine forum / Raymarine Forums / Fishfinders v / [CA] [CA11] RV-100, Separate 2d, and 3D

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] [CA11] RV-100, Separate 2d, and 3D
12-16-19, 03:51 PM
Post: #2
Chuck - Raymarine - Moderator Offline
Administrator
*******
 		Posts: 14,319
Joined: Oct 2014
Reputation: 43
RE: [CA11] RV-100, Separate 2d, and 3D
Welcome to the Raymarine Forum Schins,

Q. f I run a y-cable with an RV xdcr and a separate 2d xdcr and use, for example, 50khz, would this alter the 3D imaging?
A. Negative. 3D RealVision imaging is exclusively produced from the RV transducer's pings and received echos. Should a Y-Cable be added to an Axiom RV MFD and be interfaced to a compatible 50kHz/200kHz fishfinder transducer, then the MFD's fishinder application would additionally support a 50kHz sonar channel and a 200kHz sonar channel.
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
RE: [CA11] RV-100, Separate 2d, and 3D - Chuck - Raymarine - Moderator - 12-16-19 03:51 PM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication