Raymarine forum / Raymarine Forums / Multifunction Displays v / [CA] [CA11] Axiom Displaying no heading

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] [CA11] Axiom Displaying no heading
06-12-20, 04:05 PM
Post: #13
svgustovita Offline
Junior Member
**
 		Posts: 4
Joined: Feb 2020
Reputation: 0
RE: [CA11] Axiom Displaying no heading
I'm having the same issue. I was seeing the error every 20 seconds or so, then replaced my old Type 3 Course computer, fluxgate, ST6000+ with Evolution (ACU-400), P70s, ev-1. That seems to have elimated the "no heading" warning every 20 seconds. Now it only does it occasionally (once an hour or so). All software is up to date on all components. I have attached a drawing of my system. Please note: The diagram shows an ST600R mounted at the Binnacle. I haven't connected it to the system as I'm not sure it will work with the new Evolution. I'm hoping the new LH3 update will fix the no heading issue.


Attached File(s) Thumbnail(s)
   
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
RE: [CA11] Axiom Displaying no heading - svgustovita - 06-12-20 04:05 PM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication