[CA] [CA11] Rs125 cabling
|
12-23-19, 11:09 AM
(This post was last modified: 12-23-19 11:11 AM by Chuck - Raymarine - Moderator.)
Post: #2
|
|||
|
|||
RE: [CA11] Rs125 cabling
Welcome back to the Raymarine Forum Never II Nauti,
Q. In what way can I use/convert my rs125 gps cable to a RS150? A. Unfortunately, the Raystar 125 GPS Sensor's Cable cannot be adapted/used to instead interface a NMEA 2000 device to the system. The SeaTalkng Spur Cable supplied with the Raystar 150 GPS Sensor (or a shorter Spur Cable) must be used to interface the Raystar 150 GPS Sensor to a spur socket within system's powered and properly terminated SeaTalkng / NMEA 2000 backbone to which your system's Axiom Pro MFD will also be interfaced as a spur. |
|||
« Next Oldest | Next Newest »
|
Messages In This Thread |
[CA11] Rs125 cabling - Never II Nauti - 12-23-19, 01:05 AM
RE: [CA11] Rs125 cabling - Chuck - Raymarine - Moderator - 12-23-19 11:09 AM
RE: [CA11] Rs125 cabling - Never II Nauti - 05-29-20, 05:40 PM
RE: [CA11] Rs125 cabling - Chris - Raymarine - Moderator - 06-11-20, 12:19 PM
|
User(s) browsing this thread: 1 Guest(s)