Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] [CA11] connecting to WIFI
12-30-19, 04:41 PM
Post: #2
RE: [CA11] connecting to WIFI
Welcome to the Raymarine Forum Sam,

Please click here to view a FAQ addressing this subject. In short, there is no setting which may be changed within the MFD's settings to correct this behavior. The Wi-Fi router/access point which you are attempting to connect your MFD's Wi-Fi to appears to have been configured to issue Class A Private Network IP network addresses. Such addresses will conflict with Raymarine products having Wi-Fi communication interfaces. It is recommended that your ISP, Cisco, or the party who set up your Wi-Fi router/access point be contacted to program the device to either use DHCP IP addressing or IP address ranges which are not in conflict with the Class A IP address range used by Raymarine and have been specified within the referenced FAQ. Alternatively, the software update compressed folder may be downloaded from the Axiom/Axiom Pro/Axiom XL Software Updates web page to your computer, its contents may be extracted to the root level directory of a commonly available microSD memory card (8GB capacity will be more than sufficient) and then inserted into your MFD's microSD memory card reader or remote card reader (RCR) to update the MFD's software.
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
[CA11] connecting to WIFI - Mystere - 12-30-19, 03:49 PM
RE: [CA11] connecting to WIFI - Chuck - Raymarine - Moderator - 12-30-19 04:41 PM
RE: [CA11] connecting to WIFI - Mystere - 01-06-20, 10:34 AM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)