Raymarine forum / Raymarine Forums / Multifunction Displays v / [CA] [CA11] Can I use my Axiom Pro at home?

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] [CA11] Can I use my Axiom Pro at home?
01-13-20, 12:46 PM (This post was last modified: 01-13-20 12:48 PM by Chuck - Raymarine - Moderator.)
Post: #4
Chuck - Raymarine - Moderator Offline
Administrator
*******
 		Posts: 14,319
Joined: Oct 2014
Reputation: 43
RE: [CA11] Can I use my Axiom Pro at home?
Robert,

Q. But what connector do I need to connect the cable into the back of the Axiom please?
A. Per the information within the previously referenced FAQ, the following Power/NMEA 0183/Video Input Cables may be used with an Axiom Pro MFD:
- R62379 Straight Power/NMEA 0183/Video Input Cable (recommended for at home use or other applications not subject to tight clearances behind the MFD)
- R70029 Right Angle Power/NMEA 0183/Video Input Cable (Recommended for applications with tight clearances behind the MFD).
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
RE: [CA11] Can I use my Axiom Pro at home? - Chuck - Raymarine - Moderator - 01-13-20 12:46 PM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication