[CA] [CA11] AXIOM MFD

[Chuck - Raymarine - Moderator]

seeray96

If the transducer were the Smart NMEA 2000 version of the DST800-P17 235 mHz Triducer, then its cable would be terminated with a DeviceNet (M) plug or white SeaTalkng spur plug. If the transducer were the Smart NMEA 0183 version of the DST800-P17 235 mHz Triducer, then its cable would be terminated with bare leads and would be interfaced power and to the NMEA 0183 input leads / terminals of a device onboard. If the transducer were the analog version of the DST800-P17 235 mHz Triducer, then its cable would be terminated with bare leads, to which 1/8" male blade connectors would typically be connected, permitting the transducer's leads to be connected to the transducer terminals of an instrument, instrument pod, or iTC-5 Analog Instrument Converter.