The following warnings occurred:
Warning [2] count(): Parameter must be an array or an object that implements Countable - Line: 802 - File: showthread.php PHP 7.4.33 (Linux)
File Line Function
/showthread.php 802 errorHandler->error





Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] [CA11] hsb2 RL80C - connected to NMEA 0183 GPS data source
02-11-20, 03:50 PM (This post was last modified: 02-11-20 04:04 PM by Chuck - Raymarine - Moderator.)
Post: #1
[CA11] hsb2 RL80C - connected to NMEA 0183 GPS data source
I have a RayMarine RL80C that works fine for radar, but the Raymarine GPS unit was removed from the boat since it no longer worked. As a result the RL80C has "NO FIX".
I assume the RL80C was receiving its GPS coordinates from the old GPS.
I recently purchased an ICOM M330 with GPS, and I was wondering if I could use the NMEA output from the ICOM to feed GPS coordinates to the RL80C?
I have SeaTalk installed.
Any assistance would be greatly appreciated.
Thank you.

2001 38' SeaRay
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
[CA11] hsb2 RL80C - connected to NMEA 0183 GPS data source - cgrosby - 02-11-20 03:50 PM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)