Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] [CA11] Type 1 auto pilot pump
02-24-20, 10:25 AM
Post: #6
RE: [CA11] Type 1 auto pilot pump
Tony,

While the port marked R must be connect to the helm pump reservoir port, such care need not be taken with the A & B ports of the pump. Simply connect them in the easiest manner. After the hydraulic connections have been made and bleeding has been completed, the autopilot should be commanded to turn to starboard. If the pump causes the rudder / lower unit to turn the wrong way, then swap the pump's Motor A/B lead connections course computer / ACU's Motor terminals.
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
RE: [CA11] Type 1 auto pilot pump - Chuck - Raymarine - Moderator - 02-24-20 10:25 AM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)