The following warnings occurred:
Warning [2] count(): Parameter must be an array or an object that implements Countable - Line: 802 - File: showthread.php PHP 7.4.33 (Linux)
File Line Function
/showthread.php 802 errorHandler->error




Raymarine forum / Raymarine Forums / Product and Feature Suggestions v / [CA] [CA11] Document suggestion, AR200

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] [CA11] Document suggestion, AR200
02-17-20, 02:26 PM (This post was last modified: 02-18-20 03:55 PM by Chuck - Raymarine - Moderator.)
Post: #1
WillM Offline
Junior Member
**
 		Posts: 2
Joined: Oct 2018
Reputation: 0
[CA11] Document suggestion, AR200
I have a suggestion for the surface mounting template provided with the AR200. Document # 87170-2. Please add the location for the SeaTalk NG cable to exit the bottom of the AR200 when surface mounted. When placing flat on a hardtop, the screw holes are correct, but the placement to allow the cable to pass down through top has to be guessed at. The only accurate way to do it now is drill the STNG [censored] first, assemble AR200 in mount, then drill holes. Then, take it all back apart to seal it up.
Thanks!
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
[CA11] Document suggestion, AR200 - WillM - 02-17-20 02:26 PM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication