Raymarine forum / Raymarine Forums / Multifunction Displays v / importing .gpx to MFD

Post Reply 
 
Thread Rating:
  • 1 Vote(s) - 5 Average
  • 1
  • 2
  • 3
  • 4
  • 5
importing .gpx to MFD
07-05-17, 06:47 AM
Post: #18
Chuck - Raymarine - Moderator Offline
Administrator
*******
 		Posts: 14,319
Joined: Oct 2014
Reputation: 43
RE: importing .gpx to MFD
Welcome to the Raymarine Forum Reuben,

Q1. When I recently imported several routes it renamed them as "1", "2", etc. is that because the names were greater than 16 characters?
A1. It is recommended that you review the FAQ addressing Waypoint/Route/Track constraints found here.
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
importing .gpx to MFD - rltrbill - 06-07-16, 10:25 AM
RE: importing .gpx to MFD - mezrich - 07-04-17, 02:37 PM
RE: importing .gpx to MFD - Chuck - Raymarine - Moderator - 07-05-17 06:47 AM
RE: importing .gpx to MFD - mezrich - 07-05-17, 07:31 AM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication