Raymarine forum / Raymarine Forums / Multifunction Displays v / importing .gpx to MFD

Post Reply 
 
Thread Rating:
  • 1 Vote(s) - 5 Average
  • 1
  • 2
  • 3
  • 4
  • 5
importing .gpx to MFD
07-28-16, 10:41 AM
Post: #10
Chuck - Raymarine - Moderator Offline
Administrator
*******
 		Posts: 14,319
Joined: Oct 2014
Reputation: 43
RE: importing .gpx to MFD
Ron,

I have successfully imported each of your GPX files except for Nwpt-Mystic.gpx. When importing routes containing waypoints which have been previously entered, it is recommended that the options to:
- DO THIS FOR ALL WAYPOINT NAME CONFLICTS be selected, and
- COPY & REPLACE
be selected. Upon inspection of Nwpt-Mystic.gpx file, it was determined that waypoint "R6 Mystic RVR" had erroneously been duplicated within the waypoint sequence (i.e. the 11th and 12th waypoints of the route were both "R6 Mystic RVR". Removal of this duplicate waypoint within the route, then permitted the route to be imported by the MFD (see Nwpt-Mystic2.gpx attached to this response).


Attached File(s)
.gpx  Nwpt-Mystic2.gpx (Size: 2.71 KB / Downloads: 385)
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
importing .gpx to MFD - rltrbill - 06-07-16, 10:25 AM
RE: importing .gpx to MFD - mezrich - 07-04-17, 02:37 PM
RE: importing .gpx to MFD - Chuck - Raymarine - Moderator - 07-28-16 10:41 AM
RE: importing .gpx to MFD - mezrich - 07-05-17, 07:31 AM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication