The following warnings occurred:
Warning [2] count(): Parameter must be an array or an object that implements Countable - Line: 802 - File: showthread.php PHP 7.4.33 (Linux)
File Line Function
/showthread.php 802 errorHandler->error




Raymarine forum / Raymarine Forums / Networking / System Integration v / [CA] [CA11] Axiom to legacy SeaTalk ST6002 AP and SL70 Radar

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] [CA11] Axiom to legacy SeaTalk ST6002 AP and SL70 Radar
02-24-20, 09:07 PM (This post was last modified: 02-25-20 10:11 AM by Chuck - Raymarine - Moderator.)
Post: #1
teecat Offline
Junior Member
**
 		Posts: 5
Joined: Feb 2020
Reputation: 0
[CA11] Axiom to legacy SeaTalk ST6002 AP and SL70 Radar
Planning to upgrade to an Axiom 9 with my old(!) SL70 Radar and ST 6002 autopilot and looking to confirm my expectations. The system I'm planning is:

Axiom 9 RV w/ dual RV-220 transducers

RMK-10 keypad

RCR SD Card reader

E22158 SeaTalk to SeaTalkng converter

ST6002 Autopilot controller/course computer/fluxgate sensor

SL70 Radar (both AP and radar connected via the original SeaTalk1 bus, which would connect to the E22158)

I'm hoping to have full interface functionality between the Axiom MFD and ST6002 AP. For the SL70 Radar, I'm hoping that it can share numerical data with the system (heading, GPS, cursor position, etc.) via the legacy SeaTalk protocol messages. Does this sound like it will work with these devices? Thanks so much!
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
[CA11] Axiom to legacy SeaTalk ST6002 AP and SL70 Radar - teecat - 02-24-20 09:07 PM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication