[CA] [CA11] Element S Not Syncing with I50 Speed / Depth

[andrew@apwengineering.com]

Hi Chuck last response to this thread (no need to post the other ones).

Problem summary...
1. STW not showing on Element S from networked I50 speed instrument
2. Depth not showing on I50 depth from Element S


Solution
1. STW display needed to be configured on the Element S. I incorrectly presumed that STW would automatically show on Element S as soon as connection was made to SeaTalkng. STW can be configured to display on multiple pages.
2. Configure I50 depth to be a Repeater and not a Master

Hope you didn't waste too much time on this one.

My next and hopefully last steps in this project will be to connect the I60 wind and St4000 Autohelm.

Thanks for all your support thus far!

Andy