Raymarine forum / Raymarine Forums / Multifunction Displays v / [CA] [CA11] Upgrading from ES to Axiom pro compatibility

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] [CA11] Upgrading from ES to Axiom pro compatibility
03-18-20, 10:57 AM
Post: #2
Chuck - Raymarine - Moderator Offline
Administrator
*******
 		Posts: 14,319
Joined: Oct 2014
Reputation: 43
RE: [CA11] Upgrading from ES to Axiom pro compatibility
Welcome to the Raymarine Forum rltrbill,

Should the currently installed satellite weather receiver be a SR200 or SR150, and should both MFDs be operating with LightHouse 3 v3.11.42, then the Axiom Pro MFD and eS-Series MFD may indeed be interfaced to a common Ethernet network. Within mixed systems such as this, it would be recommended that the Axiom/Axiom Pro/Axiom XL MFD additionally (or in place of the eS/gS MFD) be interfaced as a spur to the backbone and be designated as the system's Data Master MFD. The CPT-100 transducer may remain connected to the eS128 MFD or may be adapted (part #A80490) to be mated to the RealVision Transducer socket of the Axiom Pro RVX MFD.
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
RE: [CA11] Upgrading from ES to Axiom pro compatibility - Chuck - Raymarine - Moderator - 03-18-20 10:57 AM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication