The following warnings occurred:
Warning [2] count(): Parameter must be an array or an object that implements Countable - Line: 802 - File: showthread.php PHP 7.4.33 (Linux)
File Line Function
/showthread.php 802 errorHandler->error




Raymarine forum / Raymarine Forums / Networking / System Integration v / [CA] [CA11] Connecting I70S and P70S

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] [CA11] Connecting I70S and P70S
03-29-20, 11:36 AM (This post was last modified: 03-30-20 03:04 PM by Chuck - Raymarine - Moderator.)
Post: #1
jgol Offline
Junior Member
**
 		Posts: 6
Joined: Mar 2020
Reputation: 0
[CA11] Connecting I70S and P70S
I will be installing new I70 wind package and EV-100 wheel autopilot working on one backbone system. Both display units: I70S and P70S came with only 1 white(spur) terminal at the back. (most of instructions I can find on the web, are showing display units with 2 spur terminals. Package came wit A06028 T PIECE and A06074 EXTENDER.
Please let me know if proposed connection on attached picture is acceptable:
1. Connect I70S with spur cable to A06074 EXTENDER
2. Connect P70S with spur to A06028 T PIECE and run backbone to 5 WAY CONNECTOR.
3. Connect A06074 and A06028 with backbone cable.
If not, could you explain or refer me to proper connections.
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
[CA11] Connecting I70S and P70S - jgol - 03-29-20 11:36 AM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication