Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
New Navionics Platinum+ on Classic E-80
06-10-16, 06:08 PM (This post was last modified: 06-13-16 09:27 AM by Chuck - Raymarine - Moderator.)
Post: #5
RE: New Navionics Platinum+ on Classic E-80
Thank you for contact and I am I requested a transfer.

Person I was last working with reloaded the card with charts and sonar data ( separate loads) and I tried it on the boat and charts worked with all other things like Aerial overlay, port photos, 3D etc but Sonar did not show up. I did not get a chance to review over phone with Navionics ( too long a wait at boat) but did talk to Raymarine Multifunction display rep and he said that the Classic E-80 will only accept up to 2Ghz of data. I checked to downloads as indicated on navionics site and they state 1.41.35 KHz for the Charts and 780.93Khz for sonar data which is less than 1GB. I checked the Navionics card is had 7.46GB on an 8GB card. confusing!!!
I will try them again on Monday AM. Any comments?

Thank you
John
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
RE: New Navionics Platinum+ on Classic E-80 - John Russo - 06-10-16 06:08 PM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)