[CA] [CA11] Reconnecting X10 Autopilot

[Chuck - Raymarine - Moderator]

Eniramyar,

Q1. The second link in Q2 pointing to the third party networking FAQ directs me to a Raymarine dealer locator page instead of a FAQ.
A1. Please click on the corrected link within my prior response

Q2a. I am a bit confused by the response to Q3, are you suggesting instead of using the NMEA2000 interface on the X10, that I should use the NMEA 0183 interface?
A2a. Yes. Unlike Axiom MFDs and from the standpoint of CANbus communications, the SPX autopilots were designed to support SeaTalkng rather than NMEA 2000 communications. Unlike Raymarine's Evolution autopilots, the SPX autpilots are not NMEA 2000 certified. The method described within my initial response concerning how Garmin products having a NMEA 2000 communications interface should in turn be interfaced to SPX autopilots is time proven.

Q2b. Wouldn't the NMEA 2000 interface provide more capability?
A2b. Negative.