[CA11] autopilot to qarmin gps

Thread Rating:

0 Vote(s) - 0 Average
1
2
3
4
5

Threaded Mode | Linear Mode

[CA] [CA11] autopilot to qarmin gps

04-14-20, 07:56 AM

Post: #6

Chuck - Raymarine - Moderator Offline

Administrator

Posts: 14,319
Joined: Oct 2014
Reputation: 43

RE: [CA11] autopilot to qarmin gps

Sergio,

The chartplotting product must be commanded into navigation mode by commanding it to go to a waypoint / cursor position or to follow a route. Please note that this action will alone not cause the autopilot to do anything. The autopilot must then be commanded into Track mode via the autopilot's control head. If the autopilot is not receiving navigation data after having performed the actions described above, then it will report NO NAV DATA.

« Next Oldest | Next Newest »

Messages In This Thread

[CA11] autopilot to qarmin gps - sergstang - 04-07-20, 07:19 PM

RE: [CA11] autopilot to qarmin gps - Chuck - Raymarine - Moderator - 04-08-20, 02:24 PM

RE: [CA11] autopilot to qarmin gps - sergstang - 04-08-20, 07:41 PM

RE: [CA11] autopilot to qarmin gps - Chuck - Raymarine - Moderator - 04-09-20, 07:39 AM

RE: [CA11] autopilot to Garmin gps - sergstang - 04-13-20, 08:12 PM

RE: [CA11] autopilot to qarmin gps - Chuck - Raymarine - Moderator - 04-14-20 07:56 AM

User(s) browsing this thread: 1 Guest(s)