[TG11] e125 intergration with smartcraft

Thread Rating:

0 Vote(s) - 0 Average
1
2
3
4
5

Threaded Mode | Linear Mode

[TG] [TG11] e125 intergration with smartcraft

04-13-20, 07:59 PM

Post: #2

Tom - Raymarine - Moderator Offline

Administrator

Posts: 1,067
Joined: Nov 2017
Reputation: 7

RE: [TG11] e125 intergration with smartcraft

Hello Giuseppe,

If you record some of the NMEA2000 traffic that the e125 is receiving and post that recorded log-file back here, we can take a look and see what the problem is. Usually, if the physical connection is ok, the problem is the Instance numbers within the data that identify which engine the data is coming from. The NMEA2000 specification says that 0=Port, 1=Starboard (for a twin-engine system) but they are very often configured incorrectly and we can see whether that is the case or not in your recorded data.

Regards,
Tom

Raymarine since 1999.
Interests: Diagnosis of problems in sonar/fishfinders, NMEA2000, ethernet comms, autopilots, thermal cameras
Location: Sydney, Australia.

Please don't PM me asking for direct support, please ask a public question instead so that others can see the question and answer. Forum posts will always be answered before PM requests.