[CA11] Gs Series Issues

Thread Rating:

0 Vote(s) - 0 Average
1
2
3
4
5

Threaded Mode | Linear Mode

[CA] [CA11] Gs Series Issues

04-22-20, 06:02 PM (This post was last modified: 04-23-20 08:32 AM by Chuck - Raymarine - Moderator.)

Post: #1

rtrafford Offline

Junior Member

Posts: 9
Joined: Mar 2016
Reputation: 0

[CA11] Gs Series Issues

Running Gs195 as master with a Gs195, Gs125, Gs95 as slaves. Lighthouse 3 installed on all units. Trouble is analog camera plugged into master does not appear on slaves post installation of a Flir M300c, master can see. Master nor Gs95 seem to be able to send an HDMI signal out. Earlier I ran a cable from the bridge Gs195 and could see it via HDMI.

Any input here?

« Next Oldest | Next Newest »

Messages In This Thread

[CA11] Gs Series Issues - rtrafford - 04-22-20 06:02 PM

RE: [CA11] Gs Series Issues - Chuck - Raymarine - Moderator - 04-23-20, 09:54 AM

RE: [CA11] Gs Series Issues - rtrafford - 04-23-20, 03:17 PM

RE: [CA11] Gs Series Issues - Chuck - Raymarine - Moderator - 04-23-20, 03:58 PM

RE: [CA11] Gs Series Issues - rtrafford - 04-23-20, 04:58 PM

RE: [CA11] Gs Series Issues - Chuck - Raymarine - Moderator - 04-24-20, 07:50 AM

RE: [CA11] Gs Series Issues - rtrafford - 04-24-20, 03:59 PM

RE: [CA11] Gs Series Issues - Chuck - Raymarine - Moderator - 04-27-20, 09:06 AM

RE: [CA11] Gs Series Issues - rtrafford - 05-29-20, 10:12 AM

User(s) browsing this thread: 1 Guest(s)