The following warnings occurred:
Warning [2] count(): Parameter must be an array or an object that implements Countable - Line: 802 - File: showthread.php PHP 7.4.33 (Linux)
File Line Function
/showthread.php 802 errorHandler->error




Raymarine forum / Raymarine Forums / Networking / System Integration v / [TG] SeatalkNG and Seatalk power issues.

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[TG] SeatalkNG and Seatalk power issues.
05-01-20, 07:23 AM (This post was last modified: 05-04-20 02:05 AM by Tom - Raymarine - Moderator.)
Post: #1
Pan76 Offline
Junior Member
**
 		Posts: 12
Joined: Apr 2020
Reputation: 0
SeatalkNG and Seatalk power issues.
My SeatalkNG system is somehow powering the old autopilot ST7000/300 and ST50 instruments.
And the autopilot is powering the SeatalkNG backbone.
Is this normal? Can I have the backbone powered without instruments/ap getting powered?

System:
C140W connected to STNG converter, from that a backbone cable to a STNG terminal where a AIS650 is connected and the power to STNG is supplied here.
From this terminal a backbone cable to aft conn station with a C90W.
Backbone is terminated acc. to instructions.

The converter is connected to one of the two Seatalk connections on the course computer, other units(ie ST50 instruments)are also connected here.

The autopilot/instruments have a separate switch, switching it on the STNG backbone gets powered. With switch off the autopilot/instruments gets powered when powering the STNG.
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
SeatalkNG and Seatalk power issues. - Pan76 - 05-01-20 07:23 AM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication