[TG] Prevent AIS650 to go into silent mode when switching off C140W
|
05-05-20, 03:17 PM
Post: #3
|
|||
|
|||
RE: Prevent AIS650 to go into silent mode when switching off C140W
Hello!
Correct, when powering down the MFD the AIS stops transmitting AIS info to other AIS’s and base stations. I have verified that by checking via streaming AIS data and other AIS stations. MMSI is programmed. Wires separated. No other connections to the AIS than the STNG-network. AIS has own connected GPS antenna. VSWR is 1,1 Two MFD’s connected via STNG, switching off either of them the AIS goes into silent mode and can then be set to transmit from the other one. With both MFD’s switched off I can not stop silent mode from PROAIS program either. |
|||
« Next Oldest | Next Newest »
|
Messages In This Thread |
Prevent AIS650 to go into silent mode when switching off C140W - Pan76 - 05-01-20, 07:26 AM
RE: Prevent AIS650 to go into silent mode when switching off C140W - Tom - Raymarine - Moderator - 05-04-20, 09:27 PM
RE: Prevent AIS650 to go into silent mode when switching off C140W - Pan76 - 05-05-20 03:17 PM
RE: Prevent AIS650 to go into silent mode when switching off C140W - Tom - Raymarine - Moderator - 05-07-20, 03:02 AM
RE: Prevent AIS650 to go into silent mode when switching off C140W - Pan76 - 05-07-20, 03:13 AM
RE: Prevent AIS650 to go into silent mode when switching off C140W - Chris - Raymarine - Moderator - 05-07-20, 09:39 AM
|
User(s) browsing this thread: 1 Guest(s)