MyBB Internal: One or more warnings occured. Please contact your administrator for assistance.
[DG11] ACU-400 not detected ('No Pilot' error)


Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[DG11] ACU-400 not detected ('No Pilot' error)
05-01-20, 08:31 AM (This post was last modified: 05-04-20 03:03 PM by Chris - Raymarine - Moderator.)
Post: #1
[DG11] ACU-400 not detected ('No Pilot' error)
Good day.

I have recently purchased a sailboat which has a Es75 MFD, P70s Control head, EV-1 course computer and ACU-400. All these devices work perfectly except for the ACU-400 which doesnt show up on system devices - diagnostic menu. I have connected the P70s directly to the ACU-400 via backbone (powered by ACU) and spurs and still no detection. ACU shows an orange lamp, all fuses checked. Have also checked the backbone with a multimeter and there is no breaks or shorts. I neglected to check the autopilot correctly before purchasing, it has had a motor and cable swap recently.

Software versions;
P70s: 3.07
Es75: 19.03-00036
EV-1: 2.18

Appreciate any help as I am currently sailing up the Norwegian coast and could use some helm rest!
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
[DG11] ACU-400 not detected ('No Pilot' error) - SaltySeaPup - 05-01-20 08:31 AM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)