Raymarine forum / Raymarine Forums / Autopilots v / [CC11] ST8002 Cable Sheared

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CC11] ST8002 Cable Sheared
05-11-20, 02:33 PM
Post: #2
Chris - Raymarine - Moderator Offline
Senior Member
****
 		Posts: 266
Joined: May 2016
Reputation: 0
RE: [CC11] ST8002 Cable Sheared
Hello Brewster16 and welcome to the Raymarine forum,

The cable you are indicating is sheared is a NMEA0183 cable and would only bring waypoint data to the Autopilot. It is not needed for the basic operation of the display. From what you are discribing the ST8002 is failed. We would recommend getting it tested or swapped. Please see our dealer finder fir a lost of dealers in your area,
https://www.raymarine.com/buy/find-a-dealer.html
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
RE: [CC11] ST8002 Cable Sheared - Chris - Raymarine - Moderator - 05-11-20 02:33 PM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication