Raymarine forum / Raymarine Forums / Networking / System Integration v / [TG] Networking Axiom 7 with Axiom pro 9

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[TG] Networking Axiom 7 with Axiom pro 9
05-08-20, 01:34 AM
Post: #2
Tom - Raymarine - Moderator Offline
Administrator
*******
 		Posts: 1,067
Joined: Nov 2017
Reputation: 7
RE: Networking Axiom 7 with Axiom pro 9
Hello Rom,

I would guess that the two Axiom displays are running different software versions: they need to be running the same version in order to work reliably together.

Regarding the IP Conflict message, this is appearing because your boat Wifi is providing the display with a Wifi IP address that is within the same range (10.0.x.x to 10.31.x.x) that Raymarine systems use for their own navigational networks, and so the display can't tell whether a particular IP address is on the wired or wireless networks. To be able to use the boat Wifi, the boat Wifi setup would need to be changed so that if provided IP addresses of 10.32.x.x or above. I'm afraid the navigation network's IP setup cannot be changed.

Regards,
Tom
Raymarine since 1999.
Interests: Diagnosis of problems in sonar/fishfinders, NMEA2000, ethernet comms, autopilots, thermal cameras
Location: Sydney, Australia.

Please don't PM me asking for direct support, please ask a public question instead so that others can see the question and answer. Forum posts will always be answered before PM requests.
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
RE: Networking Axiom 7 with Axiom pro 9 - Tom - Raymarine - Moderator - 05-08-20 01:34 AM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication