The following warnings occurred:
Warning [2] count(): Parameter must be an array or an object that implements Countable - Line: 802 - File: showthread.php PHP 7.4.33 (Linux)
File Line Function
/showthread.php 802 errorHandler->error




Raymarine forum / Raymarine Forums / Multifunction Displays v / [JB] Software Upgrade

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[JB] Software Upgrade
05-08-20, 03:30 PM (This post was last modified: 05-13-20 12:36 AM by Jules - Raymarine - Moderator.)
Post: #1
Yachtmaster Offline
Junior Member
**
 		Posts: 6
Joined: Apr 2020
Reputation: 0
Software Upgrade
Good day, I have an Axiom Pro 12 RVX and have been trying to upgrade the software from version 3.5.40 to version 3.11.42 and am having issues. Using wifi, the download has failed a couple of times and once when it did download completely and switched to install mode the Axiom unit itself immediately shut down. I tried downloading the update to a micro sd card on my computer and installing the update from the sd card. Same thing happens, when the display switches to install mode it immediately shuts down and I have to reboot by turning the power source off and on again. I have tried doing factory resets and putting in an empty 32gb sd card in the extra slot to no avail....??

Could the download to the sd card be corrupt...? I had trouble finding a software download link on the Raymarine site that would actually work, the one I found was at raymarine.eu

Thanks....
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
Software Upgrade - Yachtmaster - 05-08-20 03:30 PM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication