Raymarine forum / Raymarine Forums / Multifunction Displays v / [TG] [TG11] E90w with a ST 290 set

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[TG] [TG11] E90w with a ST 290 set
05-20-20, 01:22 AM
Post: #2
Tom - Raymarine - Moderator Offline
Administrator
*******
 		Posts: 1,067
Joined: Nov 2017
Reputation: 7
RE: [TG11] E90w with a ST 290 set
Hello Wouter,

I would advise connecting the ST290s into the Seatalk1 network (via the Seatalk terminals on the ST290 DPU) and then connecting Seatalk1 to the E90W through a Seatalk1 - SeatalkNG convertor.
  • Don't attempt to connect the ST290 to the rest of the system via either its Seatalk2 or NMEA2000 connections (the implementation of both was very early in the life of NMEA2000 and are not fully functional by today's standards).
  • Don't connect the E90W to Seatalk1 or NMEA0183.
  • Use SeatalkNG/NME2000 AIS and GPS (AIS700 and RS150 GPS) and everything should work well together.

Regards,
Tom
Raymarine since 1999.
Interests: Diagnosis of problems in sonar/fishfinders, NMEA2000, ethernet comms, autopilots, thermal cameras
Location: Sydney, Australia.

Please don't PM me asking for direct support, please ask a public question instead so that others can see the question and answer. Forum posts will always be answered before PM requests.
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
RE: [TG11] E90w with a ST 290 set - Tom - Raymarine - Moderator - 05-20-20 01:22 AM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication