Raymarine forum / Raymarine Forums / General Discussions v / Can't Get Radar Overlay

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Can't Get Radar Overlay
05-28-20, 01:22 PM
Post: #2
Chris - Raymarine - Moderator Offline
Senior Member
****
 		Posts: 266
Joined: May 2016
Reputation: 0
RE: Can't Get Radar Overlay
Hello jmreim11,

Without heading information in the system the Chart function does not have the data needed to overlay the radar on the chart(point of reference). You can overide this and manually select "use COG" in the "Radar without heading" setting in overlay settings. To get to this setting go to Menu>targets>radar settings.

While the boat is stopped you will not have radar overlay. While you are moving the gps will create cog(course over ground) and you will have the radar overlay on the chart,

Chris,
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
Can't Get Radar Overlay - jmreim11 - 05-24-20, 10:13 AM
RE: Can't Get Radar Overlay - Chris - Raymarine - Moderator - 05-28-20 01:22 PM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication