The following warnings occurred:
Warning [2] count(): Parameter must be an array or an object that implements Countable - Line: 802 - File: showthread.php PHP 7.3.31 (Linux)
File Line Function
/showthread.php 802 errorHandler->error

Post Reply 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[TG] [TG11] Nmea2000 temps available
06-04-20, 03:27 PM (This post was last modified: 06-19-20 01:41 AM by Tom - Raymarine - Moderator.)
Post: #1
[TG11] Nmea2000 temps available
I have a axiom pro with water temp data being provided by my sonar device. I just installed a yacht devices ydtc temperature probe to measure my engine room temperature. I configured the ydtc to output PGN 130311 with data type 3 (engine room temp). I can see the ydtc temp on the NMEA 2000 network but it’s not available on my axiom pro to insert as a page overlay. I followed up with yacht devices and they told me raymarine only supports water temp and air temp so my engine room probe will need to be configured as data type 1. I haven’t gotten to the boat to reconfigure but will assume this will work.

I’d like to add a yacht devices NMEA 2000 exhaust gas temp probe but if the raymarine can only support 2 temperatures I’m not sure if this is possible. Is it possible to have additional temperatures on the NMEA 2000 displayed on the axiom pro besides water and air temp?

If more temps can be displayed I could see adding refrigerator temp probes, live bait well, etc. surely raymarine shouldn’t limit to 2 temps.
Find all posts by this user
Quote this message in a reply
Post Reply 

Messages In This Thread
[TG11] Nmea2000 temps available - Wdeertz - 06-04-20 03:27 PM

Forum Jump:

User(s) browsing this thread: 1 Guest(s)