Raymarine forum / Raymarine Forums / Autopilots v / No autopilot after R17 update

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
No autopilot after R17 update
06-23-16, 08:01 AM (This post was last modified: 06-23-16 02:23 PM by Chuck - Raymarine - Moderator.)
Post: #5
Night Heron Offline
Junior Member
**
 		Posts: 9
Joined: Jun 2016
Reputation: 0
RE: No autopilot after R17 update
Chuck,

I did the reset and then when I followed the dockside wizard set up i got the following error: "Task Fail - inconsistent values". I repeated the process several times with the same result, each time positioning the rudders carefully as prompted with no luck. I ran the diagnostic and the files are attached. Also, i was not able to shutdown the controller, presumably because it was doing the magnetic filed check. Thanks
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
RE: No autopilot after R17 update - Night Heron - 06-23-16 08:01 AM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication