The following warnings occurred:
Warning [2] count(): Parameter must be an array or an object that implements Countable - Line: 802 - File: showthread.php PHP 7.4.33 (Linux)
File Line Function
/showthread.php 802 errorHandler->error




Raymarine forum / Raymarine Forums / Instruments v / ITC-5 With Speed/Temp

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
ITC-5 With Speed/Temp
06-21-16, 08:23 PM
Post: #1
hudsoncl Offline
Chris
**
 		Posts: 12
Joined: Feb 2016
Reputation: 0
ITC-5 With Speed/Temp
I installed a new ITC-5 to an existing depth transducer and an existing combo speed/temp transducer. The depth is displaying correctly, but the speed and temp do not. I saw in a previous thread on this site that if the thermistor is bad that the transducer won't be recognized. I measured the thermistor with my meter and it was around 3600 Ohms. This equates to way hotter than our 80 degree water temperature. I'd say the temperature sensor is bad and wonder if this is what is causing the ITC-5 not to recognize the speed/temp transducer?
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
ITC-5 With Speed/Temp - hudsoncl - 06-21-16 08:23 PM
RE: ITC-5 With Speed/Temp - hudsoncl - 06-22-16, 02:05 PM
RE: ITC-5 With Speed/Temp - hudsoncl - 06-22-16, 04:08 PM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication