The following warnings occurred:
Warning [2] count(): Parameter must be an array or an object that implements Countable - Line: 802 - File: showthread.php PHP 7.4.33 (Linux)
File Line Function
/showthread.php 802 errorHandler->error




Raymarine forum / Raymarine Forums / Multifunction Displays v / GPS not Working on eS127 and eS128 today

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
GPS not Working on eS127 and eS128 today
07-01-16, 02:41 PM (This post was last modified: 08-08-16 01:55 PM by Chuck - Raymarine - Moderator.)
Post: #1
JohnBRI Offline
Junior Member
**
 		Posts: 17
Joined: Feb 2016
Reputation: 0
GPS not Working on eS127 and eS128 today
Have a 128 and 127 networked together. Powered up this am before leaving OB for ACT and worked for a couple of minutes then Lat and long coordinates started changing rapidly then no gps. The 128 is master and I changed that to 127. Occasionally, like every 2 or 3 hours satellites Are found and it works for a few. Minutes then gradually each sat is lost. I unplugged the network cable going into the 127 and tried to operate independently as Raymarine tech had said not to connect Sea Talk cable between them already.

Need some help figuring this out as I am on vacation in Nantucket and will be going back to Rhode Island mid next week. Thanks.
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
GPS not Working on eS127 and eS128 today - JohnBRI - 07-01-16 02:41 PM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication