Raymarine forum / Raymarine Forums / Autopilots v / ST6001+ NMEA and HSB2 SeaTalk interface

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
ST6001+ NMEA and HSB2 SeaTalk interface
07-23-16, 01:06 PM
Post: #10
Greg Lee Offline
Junior Member
**
 		Posts: 8
Joined: Jul 2016
Reputation: 0
RE: ST6001+ NMEA and HSB2 SeaTalk interface
Hi Chuck,
I've not found the answer to having the AP connected to both the Raymarine Pathfinder radar and the new PC nav computer so for now the PC is driving the AP. I'll continue to pursue that but otherwise everything else is working as expected but for one objective. I'd like to display the ARPA targets on the PC. Do I need to export from the Pathfinder anything other than the TTM sentence?
Thoughts, guidance, suggestions?
Greg Lee
Huntington Beach, CA
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
RE: ST6001+ NMEA and HSB2 SeaTalk interface - Greg Lee - 07-23-16 01:06 PM

Forum Jump:


User(s) browsing this thread: 2 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication