Raymarine forum / Raymarine Forums / Autopilots v / ST6001+ NMEA and HSB2 SeaTalk interface

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
ST6001+ NMEA and HSB2 SeaTalk interface
07-25-16, 11:56 AM
Post: #12
Greg Lee Offline
Junior Member
**
 		Posts: 8
Joined: Jul 2016
Reputation: 0
RE: ST6001+ NMEA and HSB2 SeaTalk interface
Hi Chuck,
Again, thank you for the timely and complete reply. Might I confirm/clarify one point? It is not my intention to overlay the radar screen image on the PC chart. However, I would like the PC to display icons for ARP targets being tracked by the radar. I have confirmed Rose Point Coastal Explorer will accept NMEA TTM data. If I limit the NMEA output from the radar to only TTM data, that should be sufficient to display icons for ARP targets on the PC (not the radar screen image)? Do I have that correct?
Thanks,
Greg Lee
Huntington Beach, CA
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
RE: ST6001+ NMEA and HSB2 SeaTalk interface - Greg Lee - 07-25-16 11:56 AM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication