Removing antenna from open array

[Chuck - Raymarine - Moderator]

Welcome to the Raymarine Forum Mountain Boy at Sea,

The open array pedestals were and continue to be designed such that during installation, studs are screwed into the pedestal base from the outside. After the pedestal's studs have been installed and the pedestal has been positioned on the mount or mounting surface, then the supplied washers and nuts will be used to secure the pedestal to the mount or mounting surfaces. Access to the interior of the pedestal is not required to install the aforementioned studs. Should any of the parts have become fused, then you may want to try PB Blaster, Liquid Wrench, CRC Freeze OFF Super Penetrant, Loctite Freeze & Release, etc.