SR100 connection to Es75

[Chuck - Raymarine - Moderator]

robhillman,

As the eS7x MFDs feature only one Ethernet Network port and you will have two devices having Ethernet communications interfaces (i.e. RD418HD radome and SR100) which will need to be interfaced to the MFD, it will be necessary to install an A80007 HS5 RayNet Network Switch onboard. The Digital Radar Cable will be connnected one of the Ethernet Network ports of the HS5 RayNet Network Switch. The Ethernet Network port of the eS7x MFD will be interfaced to the HS5 RayNet Network Switch via an appropriate length of RayNet (F) to RayNet (F) Cable. The SR100 may be interfaced to one of the Ethernet Network ports of the HS5 RayNet Network Switch by any of the following assemblies:
- an A80272 SeaTalkhs (M) to RayNet (F) Adapter and an appropriate length of RayNet (F) to RayNet (F) Cable (preferred)
- an A80247 RayNet (F) to RJ45 (F) Adapter and an appropriate length of SeaTalkhs (M) to RJ45 (M) Cable
- an A80262 RayNet (F) to SeaTalkhs (F) Adapter and an appropriate length of SeaTalkhs (M) to SeaTalkhs (M) Cable