Upgrading from 2001 Raytheon

[Chuck - Raymarine - Moderator]

Jeff,

- Five Way Connector Bar A06064 from SeaTalkng Starter Kit T70134
----- Install Blue Terminator End Caps in Five Way Connector Bar in Positions 1 and 5

- A127 Multifunction Display Package / Lighthouse charts E70236-LNC
----- Connect B60 Transducer
----- Connect SeaTalkng white connection to Five Way Connector Bar Position 2
----- Connect Radome to Network 1 with Raynet cable
----- Connect RMK 9 to Network 2 with Raynet cable
----- Connect A127 power cable to circuit breaker
----- Connect GA150 GPS Receiver

-Ray70 Fixed Mount VHF Radio with GPS and AIS E70251
----- Connect SeaTalkng white connection to Five Way Connector Bar Position 3
----- Connect Hailing Horn M95435
----- Connect Ray70 power cable to circuit breaker

-i50 Depth Instrument Display E70059
-----Connect SeaTalkng white connection to Five Way Connector Bar Position 4

-RD418HD 4kW HD Digital Radome T70168
----- Install Raynet cable to A127 Network 1 position
----- Install power cable to circuit breaker with fuse

- RMK-9 Multifunction Display Remote Control A80217
----- Install Raynet cable to A127 Network 2 position
----- Install power cable to circuit breaker with fuse

-B60 (20 degree) - Sonar Transducer Through-Hull E66087
----- Connect B60 transducer cable to A127

- GA150 GPS Receiver A80288
----- Connect GA150 GPS Receiver to A127

Q1: Does the i50 require separate power?
A1: No. The i50 will be powered via the SeaTalkng backbone

Q2: Are the other components powered correctly?
A2: The SeaTalkng backbone should be powered from a switched 12VDC power circuit. The SeaTalkng Power Cable supplied with the SeaTalkng Starter Kit may be used for this purpose. It woudl simply be plugged into one of the white spur sockets of the SeaTalkng backbone.