Raymarine forum / Raymarine Forums / Product Selection Assistance v / [CA] [CA11] Questions on a New Configuration

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] [CA11] Questions on a New Configuration
11-14-19, 09:01 AM (This post was last modified: 11-14-19 09:22 AM by Chuck - Raymarine - Moderator.)
Post: #19
Chuck - Raymarine - Moderator Offline
Administrator
*******
 		Posts: 14,319
Joined: Oct 2014
Reputation: 43
RE: [CA11] Questions on a New Configuration
JP460,

The requirement to properly isolate marine electronics from surge/underpower conditions is no different for Axiom/Axiom Pro/Axiom XL MFDs than for other Raymarine products. Please click here to view a FAQ, the last paragraphs of which specifically address this subject. Accordingly, should such a device have been required within your prior system to prevent the MFDs from rebooting when the engines were started, then the same would be required again. Please refer to the previously referenced FAQ for products which have been commonly used for this purpose.
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
RE: [CA11] Questions on a New Configuration - Chuck - Raymarine - Moderator - 11-14-19 09:01 AM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication