Raymarine forum / Raymarine Forums / AIS v / [CA] MFD-VHF DCS-GPS-SHS-AIS Diagram

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] MFD-VHF DCS-GPS-SHS-AIS Diagram
01-02-18, 05:03 PM
Post: #5
Chuck - Raymarine - Moderator Offline
Administrator
*******
 		Posts: 14,319
Joined: Oct 2014
Reputation: 43
RE: [CA] MFD-VHF DCS-GPS-SHS-AIS Diagram
Paul,

Your latest diagram appears to be correct. Only the black and yellow leads of the MFD's SeaTalk/Alarm Cable should be interfaced to the SeaTalk bus which is supporting communications between the GPS Sensor, MFD, and SHS. As the SHS is powered, it is correctly shown supplying power to the SeaTalk bus.
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
RE: [CA] MFD-VHF DCS-GPS-SHS-AIS Diagram - Chuck - Raymarine - Moderator - 01-02-18 05:03 PM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication