The following warnings occurred:
Warning [2] count(): Parameter must be an array or an object that implements Countable - Line: 802 - File: showthread.php PHP 7.4.33 (Linux)
File Line Function
/showthread.php 802 errorHandler->error




Raymarine forum / Raymarine Forums / Radar v / E120 - 2KW Radome

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
E120 - 2KW Radome
08-22-16, 09:03 PM
Post: #1
PetrelMarine Offline
Member
***
 		Posts: 55
Joined: Feb 2016
Reputation: 0
E120 - 2KW Radome
Hi

I have an E120 with a 2KW Analog Radome with no picture/returns being displayed.
The system reports "Cable Test Status" Fail on the Self Test. Also has reported "Ship Sensor" Fail on Self Test, and "No Data Source" when using.
I will perform the Cable/Radome Resistances Test as outlined in other threads.
My questions is:
i. Is there a similar E120 pin resistance test on the scanner connection port. Want to know in case the Cable & Radome pass.
Thank you for your time.
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
E120 - 2KW Radome - PetrelMarine - 08-22-16 09:03 PM
RE: E120 - 2KW Radome - PetrelMarine - 08-23-16, 05:16 PM
RE: E120 - 2KW Radome - PetrelMarine - 08-24-16, 08:29 PM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication