Evoluion will not working properly

[Chuck - Raymarine - Moderator]

Saltydawg,

2. Response Level values are Performance, Cruising, and Leisure, not 1, 2, and 3 ... it is recommended that you verify that this setting has been configured to Performance. It is possible that you meant to specify that the maximum detected deviation was 3 deg?

3 & 4. Greatest performance, particularly when operating at slow speed, will occur when the autopilot has been fitted with a rudder reference transducer. The rudder reference transducer will be interfaced to the ACU's rudder terminals. As your responses to 3 & 4 conflict with the expected results and the vessel is experiencing low speed performance issues, should setting the Response Level not correct the problem then it would be recommended that the ACU be inspected to determine whether it has been fitted with a rudder reference transducer. If not, then it is accordingly recommended that the vessel be fitted with one. If fitted with a rudder reference transducer, then it is recommended that it be tested in accordance with information found here.

5. When a Databox within the MFD has been configured to show the SPEED (not SOG) data item, is it populated with data or does it display dashes?

Please click here to view a FAQ addressing how to determine the software level of each of the devices within your system. Have the electronics all been updated with the latest available Raymarine product software updates ... we're trying to identify whether there may be a fault with the latest software?