Evoluion will not working properly

[Chuck - Raymarine - Moderator]

Saltydawg,

Should the Select Device list specify that the Raystar 130 GPS Sensor's software level is v2.20, then it has been successfully updated.

Should you have reset the autopilot as directed, then all prior configuration settings, including drive polarity, would have been deleted. Please indicate whether the drive moved the rudder/motor/drive in the correct direction when the Dockside Wizard was executed and if not, whether you then either reversed the leads connected to the ACU's motor terminals or reversed the drive polarity via the Dockside Wizard to correct the polarity. Please indicate whether upon completion, you then took the boat out for a cruise and completed the Detecting Magnetics (determines the vessel's deviation table) ... if so, what is the maximum detected deviation value specified within the autopilot's diagnostics? Please additionally indicate the make/model of hydraulic pump which has been interfaced to the ACU-200.